Hydrocarbon resin based, transparent amber-colored, ready-to-use and easy-to-apply curing material. Applied by spraying onto the poured
Hydrocarbon resin based concrete curing material
• Used in concrete road constructions,
• Airports and runway concretes,
• Pedestrian paths, garage, parking, loading and unloading fields,
• Industrial floors,
• Terraces, beveled walls,
• Pre-stressed beams and posts,
• Producing concrete that requires curing.
• This product can be applied in all kinds of field concrete, channel and flume concretes and all of the surface curing applications.
• Reduces surface dusting.
• Minimizes shrinkage cracks.
• Minimizes contraction.
• Creates a surface resistant to stronger abrasion.
• Does not affect the normal setting time.
• Does not lose its quality and works as a coating system.
• Does not leave stains on the surface of concrete.
• Offers a more effective and economic alternative to curing methods such as curing blankets, sacks and cloths.
Dossage
• Depending on the ambient temperature, humidity and wing, the average consumption is 0.15 to 0.20 kg/m².
• In order to ensure proper curing in outdoor environments, at high temperatures and windy environments, the consumed amount of Aydos®- Kür SLV may be increased up to 0.25 kg/m².
Surface Preparation
• It is applied over the new concrete or on the top of the surface hardeners that was applied to fresh concrete by brush or roller.
• However, the concrete should be hardened enough in order to avoid damaging the surface.
Application/Warning
• Flammable. It contains solvent. It is dangerous to bring sources of ignition near storage and application areas.
• Storage and application areas should be frequently ventilated.
• Immediately after the outdoor applications, the surface should be protected against the effects like rain, snow, etc. for 2-3 hours. At the end of this period, the curing material is not affected by the external factors.
• It is a ready-to-use product and should not be diluted with water. Please shake well before use.
• It cannot be applied on dry concrete surfaces. It must not be applied to the wet surfaces.
• It should not be applied on non-porous, non-absorbent and glazed surfaces.
• After molding of vertical surfaces, the molding should be applied on horizontal surfaces after water evaporates from the surfaces and after surface smoothing processes are completed (1-2 hours later depending on temperature).
• The action time of Aydos® Kür SLV may vary by weather conditions, the thickness of the layer applied and the condition of the concrete surface.
• After the water on the freshly poured concrete evaporates, it should be applied in a thin film using a spray gun or compressed air spray machines or a roll.
• Cured areas should not be stepped on and protected from rain until they are dry.
• During the implementation, air circulation is necessary.
• Ponding and formation of bubbles should be prevented.
• The color differences on the surface shall disappear in time. It is recommended to try the product on small areas prior to application.
Kimyasal İçeriği / Chemical Contents | : | Reçine ve solvent esaslı / Resin and solvent based | |
Görünüm-Renk / Appearance-Colour | : | Şeffaf amber renkli sıvı / Transparent, amber-colored liquid | |
Yoğunluk / Density | : | 0.87 ± 0.02 kg/l. | |
Uygulama Sıcaklığı / Application Temperature / pH Value | : | +5°C ile 35°C arası / Between + 5° C and 35° C | |
Bitmiş Film Görünüşü / View Of The Finished Film | : | Yarı mat, şeffaf film / Semi-gloss, smooth, transparent film | |
Kuruma Süresi / Drying Time (20 °C) | : | 40 Dakka / minutes | |
Parlama ve Yanma Noktası/Flash and Fire Point ° C | : | + 80 °C |