Aydosper Power Flow

Highly water reducing, superplasticizing concrete admixture

Highly water reducing, superplasticizing concrete admixture

Standard
Bayındırlık Bakanlığı Poz No: 04.613/1-A3 TS EN 934-2 Çizelge 3,1 ve 3,2: Yüksek oranda su azaltıcı / süperakışkanlaştırıcı beton katkısı

 

Description
Aydosper® Power Flow is a high-performance super plasticizing concrete admixture that improves early and final strengths of concrete by significantly reducing the amount of concrete mixture water or giving fluidity to concrete with the same amount of mixture water and facilitates setting of concrete.

In foundation, apron, beam, column and shear concretes,
In bridge, viaduct, tunnel, airport and dam concretes,
In injection and floor applications,
In production of concrete that are intended to be impervious,
In precast and prefabricated concrete production,
In production of pump and pump-free ready-mix concrete.
In concretes to ensure high water reduction and long workability,
In higher quality and stronger concretes. 

Does not have any retarding effects and ensures setting of concrete in normal period of time.
Significantly improves the early high strength.
Increases the resistance of concrete in its freeze - thaw cycle, improves mechanical properties such as shrinkage and creep.
Improves the wear resistance of concrete by decreasing disintegration and perspiration.
Ensures achieving a smoother concrete surfaces with a better appearance.
In concrete applications with low water / cement ratio, it provides easy settlement and smooth surface without loss of workability.

Is suggested to be used as 0.7 – 1.8 kg for 100 kg binder (cement microsilica fly ash).
Dosage of contribution is based on the aggregate properties, water quality, concrete class, water-cement ratio and temperature of place. Therefore, it is recommended to determine the dose by preparing test mixtures in a laboratory. 
 
Kimyasal İçeriği / Chemical Contents : Polikarboksilat esaslı / Polycarboxylate based
Görünüm-Renk / Appearance-Colour : Kahverengi sıvı / Brown liquid
Yoğunluk / Density : 1.17 ± 0.02 kg/l. ISO 758
pH Değeri / pH Value : 8.0 ± 1 TS 6365 EN 1262
Klor İçeriği / Chloride Content (Cl) : < % 0.1 TS EN 480-10
Alkali İçeriği / Alkali Content       : < % 6 TS EN 480-12
Donma Noktası / Freezing Point : -5 ºC  
Korozyon Davranışı / Corrosion Behavior : Sadece TS EN 934-1 Ek A.1’de verilen bileşenleri içerir.
Contains only components according to TS EN 934-1 Annex A.1
Tehlikeli Maddeler / Dangerous Substances : Tamamen Ek ZA’ye uygundur. / Comply with annex ZA.
+20ºC’de, %50 bağıl nem koşullarında elde edilmiştir. / Is produced at +20ºC, %50 relative humidity conditions.