Aygunit-Wet Mix

It is a rapid setting accelerator additive used for wet system shotcrete containing inorganic materials.

Sprayed concrete set accelerating admixture (Shotcrete)

Standart
Bayındırlık Bakanlığı Poz No: 04.613/5-B
TS EN 934 - 5 Çizelge 2 Alkali olmayan püskürtme beton priz hızlandırıcı katkı

 

Description
Aygunit-Wet Mix, is rapid stuffening accelerator addiive that used for wet system spraying concrete that contains specail inorganic materials.

Consolidation of first and water in tunnel, gallery and subterranean structures,
In applications where sprayed concrete is the final coating,
In applications of chamfer stabilizations and rock support,
Water tight plaster application of water tanks, support tanks, dams, water pools and docks, It is used in reinforcement of ceilings, columns and bridge parts,
Permanent spraying mortar and concrete coatings
In all spraying concrete applications that demands early and final high resistance.

It eases overhead applications by means of increasing adhesion between rocks and concreted with spraying concrete.
In applications like tunnel, mine etc., It allows spraying thick concrete layers in one time thanks to its rapid stiffening feature.
Early endurance development.
Lesser outpouring (rebound).
In dry mixes, it eases tight textured dense concrete.
Do not contain chlorine and do not harm equipment's.

Aygunit-Wet Mix, dosage may vary according to concrete surface and air temperature. Also, used cement balance effects the dosage. So, in order to determine the dosage, preliminary tests must be done.
Aygunit-Wet Mix, usage ratio is between 3.0% - 6.0% of cement weight. When using more additive than usage range, final resistance may be lower.

Kimyasal İçeriği / Chemical Contents : Alüminyum sülfat içerikli karışım / Mixture of aluminum sulphate
Görünüm-Renk / Appearance-Colour : Bej (bulanık) sıvı / Beige (blurry) liquid
Yoğunluk / Density : 1.46 ± 0.03 kg/l. ISO 758
pH Değeri / pH Value : 13.0 ± 1 TS 6365 EN 1262
Viskozite / Viscosity : 35 ± 5 cP Aydos/TA 042
Klor İçeriği / Chloride Content (Cl) : < % 0.1 TS EN 480-10
Alkali İçeriği / Alkali Content       : < % 40 TS EN 480-12
Korozyon Davranışı / Corrosion Behavior : Sadece TS EN 934-1 Ek A.1’de verilen bileşenleri içerir.
Contains only components according to TS EN 934-1 Annex A.1
Tehlikeli Maddeler / Dangerous Substances : Tamamen Ek ZA’ye uygundur. / Comply with annex ZA.
+20ºC’de, %50 bağıl nem koşullarında elde edilmiştir. / Is produced at +20ºC, %50 relative humidity conditions.